08/10/2017

Engine Driven Welders

Professional engine driven welders for the mining, construction and rural applications.

MOSA Welder Brochure New TS EVO | TS EVO Multi 4
8
Yes
None
1
1000000
Search...
/engine-driven-welders/engine-driven-welders-2/
Thumbnail
Filter
Sort By:

Select Categories

+
+
Professional Welders
MOSA TS 300 KS/EL
MOSA TS 300 KS/EL Image

Diesel Engine driven welder – KOHLER KD 477-2 Engine –  Three-phase asyncronous alternator  – Three-phase generation 10 kVA – Single-phase generation 5 kVA – Max welding current: 300A

The engine-driven welders TS 300 KS/EL and TS 300 KSX/EL are professional machines with electronic control of the welding current capable of delivering up to 300 A with a duty cycle of 60%.

Equipped with a KOHLER KD 477-2 diesel engine and an asynchronous alternator, it can be used simultaneously as a welder and as a three-phase and single-phase electrical generator up to 10 kVA.

The welding current is continuous and can weld any kind of electrode (rutile, basic, cellulose) up to 6 mm in diameter. Also available is an optional remote welding control allowing welding current adjustment up to 20 metres from the welder.

The difference between the two models lies in their level of soundproofing. The TS 300 KS/EL is a machine with silenced canopy, while the TS 300 KSX/EL is a super-silent welder, designed to minimize sound emission.

Model TS 300 KSX/EL also features auto idle economizer which introduces the concept of “power on demand“, allowing both fuel savings and reduced engine wear.

Suitable for a wide range of uses including mobile welding, site fabrication, maintenance and pipeline construction.

MOSA CS 350 KSX CC/CV
MOSA CS 350 KSX CC/CV Image

Specifications

Diesel Engine driven welder – KOHLER KD 477-2 Engine –  Three-phase asyncronous alternator  – Three-phase generation 10 kVA – Single-phase generation 5 kVA – Max welding current: 350A

The engine-driven welder CS 350 KSX CC/CV is a professional machine with electronic control of the welding current capable of delivering up to 350 A with a duty cycle of 60%.

Incorporating Chopper System (high frequency 30 kHz), which allows for a more stable arc when welding and superior finished weld quality. Equipped with a KOHLER KD 477.2 diesel engine and an asynchronous alternator, it can be used simultaneously as a welder and as a three-phase and single-phase electrical generator up to 10 kVA.

Model CS 350 KSX CC/CV  also features auto idle economizer which introduces the concept of “power on demand“, allowing both fuel savings and reduced engine wear. The CT 350 KSX is able to weld any kind of electrode (rutile, basic, cellulose) up to 6 mm and takes full advantage of the engine’s power output thanks to a technology developed by MOSA known as “Power Optimizer“.

Also available is an optional remote welding control allowing welding current adjustment up to 20 metres from the welder. This is a super silent engine-driven welder with compact canopy, specifically designed to minimize sound emissions.

It is also possible to select welding output in CC or CV mode.
In CC (constant current) mode, you can choose between a characteristic with adjustable arc force, suitable for electrode welding and TIG welding (scratch start).
The CV (constant voltage) mode is suitable for WIRE WELDING (solid or flux-cored) using the optional Mosa Wire Feed Unit WF4.

MOSA DSP 400 YSX
MOSA DSP 400 YSX Image

Specifications

Diesel Engine driven welder – YANMAR 3TNV76 Engine –  Three-phase asyncronous alternator  – Three-phase generation 12 kVA – Single-phase generation 7 kVA – Max welding current: 400A

The engine-driven welder DSP 400 YSX is a professional multi process machine with digital adjustment of the welding parameters DSP (Digital Signal Processor) and welding circuit with Chopper System (high frequency 20 kHz) capable of delivering up to 400 A with a duty cycle of 60%.

Equipped with a Yanmar 3TNV76 water cooled diesel engine and an asynchronous alternator, it can be used simultaneously as a welder and as a three-phase and single-phase electrical generator up to 12 kVA.

Designed to meet the requirements of professional welding in direct current, a selector switch allows the operator to choose between 5 different welding programs:

  1. LIFT ARC TIG – TIG welding by controlling start-up in “Lift Arc” mode. The arc begins with a simple contact of the electrode on the workpiece and lifting the tungsten electrode from the workpiece initiates the arc without inclusion.
  2. MMA STICK (3 PROGRAMS) – Specific for MMA ELECTRODE (CC) welding, they offer three different levels of arc force, with increasing short-circuit currents including cellulosic.
  3. MIG MAG – Dedicated to SOLID WIRE OR FLUX-CORED WELDING, providing a constant voltage (CV) welding process with optional MOSA WF4 Wire Feed Unit.

The DSP 400 YSX is a super-silent engine-driven welder with compact canopy, suitable for a wide range of applications, including large metal fabrications oil pipelines and construction sites.

In according with CE regulation

MOSA DSP 500 PS
MOSA DSP 500 PS Image

Specifications

Diesel Engine driven welder – PERKINS 404D-22G Engine –  Three-phase asyncronous alternator  – Three-phase generation 16 kVA – Single-phase generation 12 kVA – Max welding current: 500A

The engine-driven welder DSP 500 PS is a professional multi process machine with digital adjustment of the welding parameters DSP (Digital Signal Processor) and welding circuit with Chopper System (high frequency 20 kHz) capable of delivering up to 500 A with a duty cycle of 60%.

Equipped with a Perkins series 400 water cooled diesel engine and an asynchronous alternator, it can be used simultaneously as a welder and as a three-phase and single-phase electrical generator up to 20 kVA.

Thanks to the lower engine speed (1500 rpm) it is suitable for continuous operation in all conditions. Designed to meet the requirements of professional welding in direct current, a selector switch allows the operator to choose between 5 different welding programs:

  1. LIFT ARC TIG – TIG welding by controlling start-up in “Lift Arc” mode. The arc begins with a simple contact of the electrode on the workpiece and lifting the tungsten electrode from the workpiece initiates the arc without inclusion.
  2. MMA STICK (3 PROGRAMS) – Specific for MMA ELECTRODE (CC) welding, they offer three different levels of arc force, with increasing short-circuit currents including cellulosic.
  3. MIG MAG – Dedicated to SOLID WIRE OR FLUX-CORED WELDING, providing employing a constant voltage (CV) welding process with optional MOSA WF4 Wire Feed Unit.

The DSP 500 PS is a super-silent engine-driven welder with compact canopy, suitable for a wide range of applications, including large metal fabrications oil pipelines and construction sites.

In according with CE regulation

MOSA DSP 600 PS
MOSA DSP 600 PS Image

Specifications

Diesel Engine driven welder – PERKINS 1103A – 33G1 Engine –  Three-phase asyncronous alternator  – Three-phase generation 30 kVA – Single-phase generation 15 kVA – Max welding current: 600A

The engine-driven welder DSP 600 PS is a professional machine with digital adjustment of the welding parameters DSP (Digital Signal Processor) and welding circuit with Chopper System (high frequency 20 kHz). Equipped with a Perkins series 1103 diesel engine and an asynchronous alternator, it can be used simultaneously as a welder and as a three-phase and single-phase electrical generator.

Thanks to the lower engine speed (1500 rpm) it is suitable for continuous operation in all conditions. Designed to meet the requirements of professional welding in direct current, a selector switch allows the operator to choose between 5 different welding programs:

  1. LIFT ARC TIG – TIG welding by controlling start-up in “Lift Arc” mode. The arc begins with a simple contact of the electrode on the workpiece and lifting the tungsten electrode from the workpiece initiates the arc without inclusion.
  2. MMA STICK (3 PROGRAMS) – Specific for MMA ELECTRODE (CC) welding, they offer three different levels of arc force, with increasing short-circuit currents including cellulosic.
  3. MIG MAG – Dedicated to SOLID WIRE OR FLUX-CORED WELDING, providing employing a constant voltage (CV) welding process with optional MOSA WF4 Wire Feed Unit.

The DSP 600 PS is a super-silent engine-driven welder with compact canopy, suitable for a wide range of applications, including large metal fabrications, oil pipelines and use in construction sites.

In according with CE regulation

MOSA DSP 2x400 PS
MOSA DSP 2x400 PS Image

Specifications

Diesel Engine driven welder – PERKINS 1103A – 33TG1 Engine –  Three-phase syncronous alternator  – Three-phase generation 40 kVA – Single-phase generation 20 kVA – Max welding current: 2X400A

The engine-driven welder DSP 2×400 PS is a professional multi process machine with digital adjustment of the welding parameters DSP (Digital Signal Processor) and welding circuit with Chopper System (high frequency 20 kHz) capable of delivering up to 2x400A with a duty cycle of 60%.

Equipped with a Perkins series 1103 water cooled diesel engine and an asynchronous alternator, it can be used simultaneously as a welder and as a three-phase and single-phase electrical generator up to 40 kVA. Thanks to the speed of engine rotation (1500 rpm) it is suitable for continuous operation.

The DSP 2×400 PS allows the operators to work with two welding positions, each independent, with a current of 400A.

Designed to meet the requirements of professional welding in direct current, a selector switch allows the operator to choose between 5 different welding programs:

  1. LIFT ARC TIG – TIG welding by controlling start-up in “Lift Arc” mode. The arc begins with a simple contact of the electrode on the workpiece and lifting the tungsten electrode from the workpiece initiates the arc without inclusion.
  2. MMA STICK (3 PROGRAMS) – Specific for MMA ELECTRODE (CC) welding, they offer three different levels of arc force, with increasing short-circuit currents including cellulosic.
  3.  MIG MAG – Dedicated to SOLID WIRE OR FLUX-CORED WELDING, providing employing a constant voltage (CV) welding process with optional MOSA WF4 Wire Feed Unit.

The DSP 2×400 PS is a super-silent engine-driven welder with compact canopy, suitable for a wide range of applications, including large metal fabrications, oil pipelines and use in construction sites.

In according with CE regulation

(NEW) TSEVO | TSEVO MULTI
(NEW) TSEVO | TSEVO MULTI Image

Click Image to take you to MOSA TS EVO web page to check out the latest in professional welding technology

Professional Welders
MOSA TS 300 KS/EL Image
MOSA TS 300 KS/EL
Diesel Engine driven welder – KOHLER KD 477-2 Engine –  Three-phase asyncronous alternator  – Three-phase generation 10 kVA – Single-phase generation 5 kVA – Max welding current: 300A The engine-driven wel... Read More